- 20 -
1. Turn the ESC switch to “OFF”
①.
6.1 Starting the engine
2. Turn the air vent knob to “ON”
② .
3. Turn the 3 in 1 switch to “CHOKE”
③,
a. Ignition circuit is switched on.
b. Fuel is switched on.
c. choke is switched off
TIP:
warm engine. Push the choke knob in to the position “ON”.
The choke is not required to start a
4. Pull slowly on the recoil starter until it is
engaged, then pull it briskly.
TIP:
Grasp the carrying handle firmly to prevent
the generator from falling over when pulling the
recoil starter.
5
.
After the engine starts, warm up the
engine until the engine does not stop
when the choke knob is returned to
the “ON” position
④.
TIP:
When starting the engine, with the ESC “ON”, and there is no load on
the generator:
