IP
•
Tube E
2
Duo
Engage Communication Inc.
The cabling used to connect IP
•
Tube E
2
Duo LAN Ports to a switch, router or hub is straight
through Ethernet cabling.
2.4
IP
•
Tube E
2
Duo Configuration Parameters
The setup of IP
•
Tube E
2
Duo involves configuration of the:
•
IP
•
Tube E
2
Duo Security Parameters
•
Interface Specific Parameters
•
IP
•
Tube E
2
Duo System Parameters
2.4.1
IP
•
Tube E
2
Duo Security Parameters
To establish a Full On Source, Destination Address envelopes must be addressed to specific Ethernet
MAC addresses.
Interconnectivity is selectively controlled at the interface, network device and
application layers.
No device on the public network can access, or pass data to LAN2 for delivery to the private network
other than another IP
•
Tube E
2
Duo. Thus connectivity via UDP from the public network is limited
to the IP
•
Tube itself.
2.4.2
Interface Specific Parameters
Console Configuration Parameters
Serial communication settings to the USB serial port should be set as:
115200 baud, 1 stop bit, no parity, 8 bit data, flow control none
LAN Configuration Parameters
IP
•
Tube E
2
Duo Ethernet number 2 (LAN2) is configured for network connectivity. The following
parameters must match the configuration of the LAN interface to which it is connected.
2.4.3
IP
•
Tube E
2
Duo System Parameters
System parameters include IP
•
Tube E
2
Duo Host name, the Ethernet IP address and the default
router.
host name
Provide a unique name for IP
•
Tube E
2
Duo.
Example:
host name AptosTubeE2
ip address
IP
•
Tube E
2
Duo requires configuration of the LAN2 (WAN) interface which will communicate to
another IP
•
Tube E
2
Duo. IP
•
Tube E
2
Duo IP packets communicate over LAN2 only. Configuration
of the LAN1 (Local Network) interface is optional. Management access to the unit via SSH is possible
via LAN1 or LAN2.
2
INSTALLATION QUICKSTART
Page 8
