IP
•
Tube E
2
Duo
Engage Communication Inc.
4.3.2
Online Help
Included in the General commands is the
help
command, providing information on the entire com-
mand set.
4.3.3
Configuration Modes
For the
config
and config
interface
commands, Engage employs a modal approach. The user enters
the Config mode, makes changes, then Saves those changes. On Saving the changes the user leaves
the Config mode.
The Config interface mode, within the Config mode, is used to set parameters for a specified interface.
Once in the Configuration mode, the user enters the
interface
command. All subsequent commands
apply to the specified interface.
The command prompt indicates the mode of operation:
•
name#
the single “#” indicates standard mode
•
name##
indicates IP
•
Tube E
2
Duo is in the Config mode
•
name(LAN1)##
IP
•
Tube E
2
Duo is in Config Interface mode for LAN Port 1
To move up one level, from Interface Config mode to Config mode, enter the
interface
command
with no argument. To change between interfaces when in Interface Config mode, specify the new
interface. For example:
name(s1)## interface lan1
Note: The LAN1 port is the private (local) interface, commonly receives data and LAN2 is the
public (WAN) port and generally sends data.
4.3.4
Syntax for Command Parameters
{}
== one of the parameters in set is required
[ ] == one of the parameters in set is allowed (optional)
4.4
System Level or General Commands
passwd
Allows setting or modifying the login password. The IP
•
Tube E
2
Duo ships with default passwords.
On entering the
passwd
command, the user is prompted to enter, and confirm, the new password.
bye
|
quit
|
logout
Any of these commands will terminate the user session. If you have unsaved configuration changes,
you will be prompted to save or discard the new configuration.
reset
Resets IP
•
Tube E
2
Duo.
help [help
|
all
|
config
|
show]
4
COMMAND LINE INTERFACE
Page 13
