Eng3 4650-00, User Manual, Page: 16 / 44

10
eng
3
6.3
Nasal Cannula
The NanoVi
™ device can be used with a nasal cannula inserted on the outlet in the middle of the Flex-
Arm attachment. For proper use of the nasal cannula, refer to Appendix A: Accompanying Documents,
User Manual for Nasal Cannulas.
The NanoVi™ device should only be used with the nasal cannula
that has the make and model: Nasal Cannula (Adult) Salter Style 1600-1. For proper operation, a short
cannula that has one-foot instead of the standard seven-foot length tubing is used. The one-foot
disposable cannula is shown in Figure 6.5. The user does not have to be still when using the cannula.
It allows the user to make small movements and turn their head without interrupting their session. Use
of the cannula is shown in Figure 6.6.
6.4
Power On
Press the large button on the front of the device to turn the power on. The power button will illuminate
with a green circle and the touch screen display will automatically start with a self-test. Once the
device is ready, the screen will display standard user options. Pressing the power button at the end of
a session will turn the device off. If you do not turn the device off and it is not used for 15 minutes, it
will turn itself off.
6.5
Touch Screen Interface
The touch screen is operated by lightly touching it with a finger. If necessary, a soft blunt object could
be used to operate the touch screen. Hard or sharp objects should never be used.
A tone sounds each time you press a button, indicating that your input was registered through the
touch screen.
Nosepiece
Fitting to
Flex-Arm
Figure 6.5: Nasal cannula Figure 6.6: Nasal cannula use