ENFORCER Enhanced HDMI
®
Extender over Cat5e/6
2
SECO-LARM U.S.A., Inc.
The ENFORCER Enhanced HDMI Extender over Cat5e/6 extends the range of HDMI signals by using an active transmitter
and receiver to send video and audio over a single Cat5e/6 cable. 1080p HDMI Signals can be transmitted up to 330ft (100m)
between the two units with zero signal loss, while 4Kx2K/UHD HDMI Signals can be transmitted up to 230ft (70m). The
extender supports IR signals using the included IR transmitter and receiver, allowing the user to use a remote control from
one end of an installation to control a device such as a TV or media player at the opposite end of the installation. The extender
also supports 100BaseT Ethernet pass-through and bi-directional RS-232 control. A single power supply can power both
devices from either end of the installation.
•
Signal Strength
– Active operation ensures that the signal strength will remain strong over the length of the cable.
•
Distance
– The Enhanced HDMI Extender over Cat5e/6 can transmit a clear HDMI signal up to 330ft (100m).
•
Formats Supported
– The Enhanced HDMI Extender over Cat5e/6 support both progressive and interlaced formats:
4K/1080p/1080i/720p/576p/576i/480p/480i.
•
Plug and Play
– The Enhanced HDMI Extender over Cat5e/6 come as a complete set consisting of a transmitter,
receiver, power supply, and IR adapters. No adjustments or settings need to be made. The unit is ready to use right out
of the box.
•
Zero Signal Loss
– Integrated circuits in the transmitter and receiver clean, buffer, and amplify the HDMI signal. This
prevents signal loss and ensures a clear signal regardless of the length of the cable up to the maximum range.
•
Bi-Directional IR
–Send IR signals from the source to the monitor or from the monitor to the source for discrete
operation of devices.
•
Bi-Directional RS-232
–Send RS-232 commands from a control system to the display and back without extra cabling.
•
Ethernet pass-through
– 100BaseT Ethernet pass-through to connect remote displays to local networks.
•
Connect Multiple Units
– Repeat up to four sets to extend HDMI range up to 1300ft (400m).
Model
MVE-AH1H1-02ZQ
Input video signal
3.3V
Input DDC signal
5Vp-p (TTL)
Maximum single link range
4Kx2K@30Hz
Deep color
48-bit
Video formats supported
High-speed HDMI with 3D, HDCP 1.2
Audio formats supported
LPCM, Dolby-AC3, DTS 7.1, DSD
Output video
HDMI
Resolutions supported
4K/1080p/1080i/720p/576p/576i/480p/480i
Range – 1080p
Cat6
Up to 330’ (100m)
Cat5e
Up to 295' (90m)
Range – 4K
Cat6
Up to 230’ (70m)
Cat5e
Up to 196' (60m)
Video amplifier bandwidth
10.2Gbps
Video input connector
HDMI Type A 19-pin female
Maximum input cable length
24AWG: 50' (15m); 26AWG: 32' (10m); 28AWG: 16' (5m)
Cat5e/6 wiring standard
T568-B
IR pass-through
30~50kHz
RS-232 pass-through
115,200 baud
Ethernet pass-through
100BaseT
Operating voltage
24VDC
Power supply
1A@24VDC (1 adapter) (2.1mm plug)
ESD protection (human body model)
±8kV (air-gap discharge), ±4kV (contact discharge)
Current draw
Transmitter
150mA@24VDC
Receiver
250mA@24VDC
Operating temperature
32°~104° F (0°~40° C)
Operating humidity
20~90% RH (no condensation)
Dimensions
3
15
/
16
”x3
15
/
16
”x1
1
/
8
” (100x100x28mm)
Weight
11.3-oz (300g) (each)
Introduction:
Features:
Specifications:
