12
Page: 15
C H A P T E R 1 2 : A D V A N C E D F U N C T I O N S
12.1 Chime Feature
12.2 Omitting Inputs
12.3 Keypad Hold Up
If an emergency alarm is needed, press
and hold both the
1
and
7
keys.
A ‘hold up’ alarm will be generated.
Note: The Hold Up facility needs to be
enabled by your engineer (either silent or
full alarm)
2-Key HU and any duress codes
programmed on the system by your
engineer are not permitted to send a
signal to the Alarm Receiving Centre
under police regulations in England,
Wales or Northern Ireland
Please note that the key-fob can also
be programmed to support a hold up
alarm. Please discuss this with your
engineer.
Page: 15
C H A P T E R 1 2 : A D V A N C E D F U N C T I O N S
12.1 Chime Feature
12.2 Omitting Inputs
12.3 Keypad Hold Up
If an emergency alarm is needed, press
and hold both the
1
and
7
keys.
A ‘hold up’ alarm will be generated.
Note: The Hold Up facility needs to be
enabled by your engineer (either silent or
full alarm)
2-Key HU and any duress codes
programmed on the system by your
engineer are not permitted to send a
signal to the Alarm Receiving Centre
under police regulations in England,
Wales or Northern Ireland
Please note that the key-fob can also
be programmed to support a hold up
alarm. Please discuss this with your
engineer.
Page: 15
C H A P T E R 1 2 : A D V A N C E D F U N C T I O N S
12.1 Chime Feature
12.2 Omitting Inputs
12.3 Keypad Hold Up
If an emergency alarm is needed, press
and hold both the
1
and
7
keys.
A ‘hold up’ alarm will be generated.
Note: The Hold Up facility needs to be
enabled by your engineer (either silent or
full alarm)
2-Key HU and any duress codes
programmed on the system by your
engineer are not permitted to send a
signal to the Alarm Receiving Centre
under police regulations in England,
Wales or Northern Ireland
Please note that the key-fob can also
be programmed to support a hold up
alarm. Please discuss this with your
engineer.
The chime feature can be used on door
contacts to enable a ‘chime’ sound when
a door (input) is opened. This feature
can be set up by your installer.
To disable the chime on the keypad,
close all doors and when ‘c’ is displayed,
press the
c
key, a capital ‘C’ will be
displayed, this will then activate the
chime on any additional keypads with
extension speakers installed. If you wish
to disable the chime altogether press the
c
key again.
NOTE:
Chime should not be used on
motion detectors as this will drain the
battery.
If an PA alarm is needed, press and hold
both the
1
and
7
keys or hold
p
for 3 seconds and a ‘PA’ alarm will be
generated.
Note: The PA facility needs to be enabled
by your engineer (either silent or full
alarm)
Please note that the key-fob can also be
programmed to support a PA alarm.
Please discuss this with your engineer.
If a fire alarm is needed, press and hold
f
for 3 seconds and a ‘fire’ alarm will be
generated.
Note: The Fire alarm key need to be
enabled by your engineer.
I: Chime Feature
J: Personal Attack From Keypad
K: Fire Alarm From Keypad