3.1 Configure the Spider AT 3000 series Manually using
the Device Configuration Utility
Installation of the Device Configuration Utility and configuration of the device using this tool are detailed in
the Device Configuration Utility User Guide.
Once the initial configuration has been performed with the Device Configuration Utility you will be able to
communicate with the server that is hosting the Provisioner software, and configure the Spider AT 3000
over-the-air. Refer to the Provisioner User’s Guide for detailed device configuration instructions.
The default Spider AT 3000 parameters result in the device reporting to the server
when activated and then once per day. When not actively reporting to the server, the
device will be in sleep mode and will not receive commands from the Provisioner
server until it wakes up for its daily report.
- 18 -
