2.1 Controls and Indicators
The button on the underside of the Spider AT 3000 functions as both the power switch and the activation
switch.
To deactivate the Spider AT 3000, press and hold the power switch, located on the underside of the unit,
for three to five seconds. The LED will become solid red then go off. When the light is off, the unit is
deactivated.
When you are ready to activate the Spider AT 3000, press and hold the power switch for three to five
seconds until you see a blinking light. The LED will blink 12 times within a 3 second period if the battery
voltage is in its highest range. If the battery is within its normal voltage range, the LED will blink on for one
second, off for one second, then on for one second. The LED will then go off. When the light is off, the unit
is activated.
- 5 -
