Integration Guide
Draft
EDG0208IG001
Page 43
Rev. 1.03 –4/19/07
10.0 Setup and Initialization
10.1 General
Setup
The data modem is controlled through the Modem RS232 port on the development board. Connect a nine-
pin straight through serial cable from the Modem RS232 connector to the serial port on the controlling
computer.
Hook up the power supply, connect the antenna, and install the SIM into the modem.
10.1.1
HyperTerminal Configuration for Enabler EDG0208
The following provides an example for setting up a Windows HyperTerminal session that can be used to
experiment with various configurations on the Enabler EDG0208 for controlling computer:
1. Select the connection interface, Direct to Com 1 (or whatever port is the serial port).
Figure 20 HyperTerminal Definition
Summary of Contents for Enabler EDG0208
Page 26: ...Integration Guide Draft EDG0208IG001 Page 21 Rev 1 03 4 19 07 Figure 11 Back of EDG0208 01 ...
Page 28: ...Integration Guide Draft EDG0208IG001 Page 23 Rev 1 03 4 19 07 Figure 13 Back of EDG0208 01 ...
Page 29: ...Integration Guide Draft EDG0208IG001 Page 24 Rev 1 03 4 19 07 Figure 14 Front of EDG0208 02 ...
