Enerzone Destination 2.3, Installation And Operation Manual, Page: 42 / 56

42
Destination 2.3 Insert Installation and Operation Manual
Appendix 1: Installing the Optional Fresh Air Intake Kit
Only remove the knock-out that will be connected to the fresh air inlet.
To install a fresh air intake kit to the insert, the purchase of accessory AC01298 is required.
Using pliers, remove the rectangular knock-
out plate (A) located on the left or right side
of the convection air jacket. Choose the side
that is best for your installation.
Then, install the fresh air kit adapter (B) using
4 screws (C) . Secure the flexible pipe
1
(E) to
the adapter (B) using one of the adjustable
pipe clamps (D) . Secure the other end of the
pipe to the outside wall termination (F) using
the second adjustable pipe clamp (D) . The
outside wall termination (F) must be installed
outside of the building.
1
The pipe must be HVAC type, insulated, and must comply with ULC S110 and/or UL 181, Class 0
or Class 1.