manualshive.com logo in svg

Enerzone Destination 2.3, Installation And Operation Manual, Page: 38 / 56

Share
Download
Enerzone Destination 2.3 Installation And Operation Manual Download Page 38

38

 

Destination 2.3 Insert Installation and Operation Manual

 

10.5  Liner Connection 

Two options are possible to connect the liner to the insert: 

10.5.1 Liner Starter Adaptor 

Two options are possible: 

Install the chimney liner starter adapter, provided with the chimney liner. Follow the chimney liner 

starter adapter manufacturer's instructions. 

In order to connect the chimney liner starter adapter to the flue outlet, install three brackets with the 

three screws, all provided in the user manual, on top of the insert.  

 

The long end of the brackets must be attached to the insert. Insert the chimney liner into the flue 

collar of the unit and secure the liner to the brackets with three self-tapping screws (not included).  

The dealer may offer a liner fastening system (AC02006), sold separately. Follow the installation 

instructions provided with the liner fastening system. 

 

 

Summary of Contents for Destination 2.3

























































Reviews:

No comments