Page 20
Product Specification Manual - Destination 1.9
ENGLISH
6. Install the connector
(I)
supplied with the manual kit in the hole formed in the plate
(B)
in
step 5.
7. Pass the new wires through the connector
(I)
and install the sleeve
(J)
supplied with the
manual kit on the BX wire.
8. Join the black and white wires using marettes
(K)
(not supplied) and secure the ground wire
with the screw
(E)
kept in step 3.
9. Close the connection box by screwing in the plate
(B)
with the two screws
(A)
kept in step 1
and secure the BX wire by tightening the screw
(L)
of the connector
(I)
.
G
I
H
J
L
A
E
K
