5
MODEL: EWV-SPORT-R
USER’S MANUAL
3.3.3 INSTALLING THE BRAKE CABLE
1. Insert the cable through the cable adapter barrel on the caliper.
2. Making sure that the cable housing is firmly sealed within the cable adjuster barrel, insert the end of the cable through
the anchor bolt on the caliper. Take up slack in the cable, then tighten the cable anchor bolt. Final tightening torque 6-8 Nm.
3. Adjust the screw of the brake lever to fasten or loosen the brake cable.
Note:
Be sure there is no more than 20 mm excess cable beyond anchor bolt.
3.4 INSTALLING THE MOUNTAIN ELECTRIC BIKE HANDLEBAR
1. Take out the handlebar
and remove the protective
paper cover from the stem.
2. Use wrench to loosen
the screw counterclockwise.
3. Insert the handlebar inside
the stem, and adjust the
centred position.
4. Cover the handlebar clip,
then tighten the screws.
3.5 ASSEMBLY REQUIREMENTS
In order to ensure cycling
safety and performance,
the fastening requirements
for the bolts of key places
are listed hereafter.
NAME OF CLAMP BOLTS
STANDARD TORQUE /NM
Bolt for handlebar
1 bolt / 2 bolts
M5
10-12 Nm
M6
12-15 Nm
4 bolts
M4
4-6 Nm
M5
6-8 Nm
M6
8-10 Nm
Handlebar expander bolt
M6
12-15 Nm
M8
15-18 Nm
Handle bar stem and fork clamp bolt
M5
8-10 Nm
M6
10-12 Nm
Sunflower fixing bolt
4-6 Nm
Saddle
M6
10-12 Nm
M8
15-18 Nm
Seat-post fixing bolt
M4
8-10 Nm
M5
10-12 Nm
M6
12-15 Nm
Front wheel
25-30 Nm
Rear wheel
40-45 Nm
Rear rack
M5
6-8 Nm
Derailleur
M6
8-10 Nm
M10 8-10 Nm
