1. Product information
1.1 Function
Use
exodraft
model RSHT chimney fan is a chimney top mounted ventilator that is designed to provide
large flue gas volume capacities. It is intended for use with solid fuel but can also be used for non-
solid fuel provided a safety system is part of the installation (refer to the manual: “RS for Gas & Oil
Applications”). The use of the RSHT chimney fan is not restricted to any type of chimney, because the
fan creates a negative pressure (below atmospheric) in the chimney.
Typical uses are: Controlling the draft for a residential solid fuel fired boiler, fireplace, stove, BBQ, or
pizza oven.
Function
The RSHT chimney fan is designed to be able to withstand the high temperatures associated with
wood burning and to minimize the creosote buildup in the chimney flue and on the chimney fan.
The axial vane construction provides a self-cleaning effect. This product is developed to prevent draft
problems by creating a mechanical draft in venting systems and thereby also increasing the capacity
and efficiency of a venting system. Though the chimney fan is not limited to such use, it is perfect for
use with fireplaces, barbecues, pizza ovens and wood stoves.
Code compliance
Installations must conform to requirements of the authority having jurisdiction. Where required by
the authority having jurisdiction, the installation must also conform to the Standard for Draft Equip-
ment and NFPA 211.
All electrical wiring must be in accordance with the requirements of authority having jurisdiction or,
in the absence of such requirements, with the National Electrical Code, NFPA70.
1.2 Shipping
The packing list (attached to one of the packages) clearly lists all items in the shipment and each package has a label
showing the contents. Check the list against all materials on the job site for completeness.
NOTE
All single phase fans are shipped with a capacitor and junction box connected via conduit. The
capacitor is located INSIDE the junction box. Please do not discard.
1.3 Warranty
exodraft
products are warranted for a period of two (2) years following the date of invoice. Replacement or repair will be
at
exodraft
’s discretion, provided factory inspection shows a defect in material or workmanship.
2-Year Factory Warranty
We promise the original user that we will replace or repair as we may elect, any part or parts of the new RSHT Chimney Fan
which are defective in material or workmanship without charge for parts and labor (not including labor for dismantling
and installation, freight, etc.) during the first 2-years following the date of installation.
10-Year Corrosion Perforation Warranty
We promise the original user that we will replace or repair as we may elect, any part or parts of the RS Chimney Fan which
are perforated due to corrosion without charge for parts or labor (not including dismantling and installation, freight, etc.)
during the first 10-years following the date of installation.
Complete warranty conditions are available at www.enervex.com or request a copy at:
[email protected] or at tel.: 1-800.255.2923.
3
3100153 RSHT009 - 016 2012-11-15
