enervent Neo eWind, Installation Instructions Manual

Page: 88 / 128

88
READ FIRST
This instruction manual is intended for all the persons
involved in the installation of the Enervent ventilation
units. Only qualified professionals may install the
equipment described in this manual in accordance with
the instructions in this manual and the local laws and
regulations. If the instructions provided in this manual are
not followed, the warranty for the equipment becomes
void and damages may be caused to persons or property.
The equipment described in this manual may not be
used by persons (including children) with reduced
physical, sensory or mental capacity or without sufficient
experience or knowledge, unless a person responsible for
their safety is supervising and advising them in the use of
the equipment.
If the delivery does not contain all of the
components listed in the section ‘Contents of
the delivery’, please check the order and contact
your distributor or Enervent before commencing
installation.
FOR YOUR INFORMATION
If you need technical support, please check the
equipment type and serial number from the type plate.
TYPE PLATE
IP 20
Type label
1234567890
Ventilation unit
TYPE:
W/ V/ HZ/ A: 1141/230,1~/50/6.1
www.enervent.com