enervent Neo eWind, Installation Instructions Manual

Page: 104 / 128

104
Parameter list
Parameter Description
Factory
setting
Note
Modbus
register
Field
setting
c24 Threshold value for summer/winter
temperature,
control range –10…+10°C, step 1°C
4°C
The 24-hour average temperature of the
outdoor air. Above the threshold value, the
boosted operation for the removal humidity
is in the summer mode, and below the
threshold value, it is in the winter mode.
137
c25 Threshold value for dehumidification,
control range 10–100 %RH, step 5% 45%
In the winter mode, the boosted operation
for the removal of humidity starts when the
humidity value exceeds the threshold value.
69
c26 Threshold value for starting
dehumidification, control range: 5–30%,
humidity exceeds the 48-hour average value,
step 5%
15%
In the summer mode, the boosted operation
of for the removal of humidity starts when
the relative humidity exceeds the 48-hour
average value of humidity by the amount of
the threshold value.
70
c27 Boosted operation for the removal of carbon
dioxide, on/off
Off Coil 21
c28 Threshold value for starting the carbon
dioxide removal, control range: 600–1,200
ppm, step: 100 ppm
1,000
ppm
76
c29 Boosted operation for the removal of
humidity with the rotating heat exchanger,
on/off
Off Coil 24
c30 Display dimmed in the standby mode, on/off Off Panel-specific setting off: dark display in the
standby mode, on: dimmed display in the
standby mode.
Internal
c31 Modbus address of the automation
motherboard, control range: 1–99, step: 1
1 640
c32 Modbus bus speed, 1 = 9,600, 2 = 19,200, 3
= 115,200
2 19,200 bps 733