DESCRIPTION
Warning
–
Read the manual before assembling or commissioning.
–
The contents of this manual are to be observed by all who work for any
reason on the unit and its appertaining system parts.
–
This manual is intended especially for authorised personnel.
–
This manual is to be regarded as part of the burner and shall always be
available near the place of installation.
–
The burner is only to be installed by qualiied personnel
–
Check that the burner is suitable for the boiler´s power range.
–
The burner is to be installed such that it complies with any local
regulations relating to electrical safety, boilers and fuel distribution.
–
Check that the burner is approved for the gas quality intended used.
–
No burner safety systems are to be disengaged.
–
The itter is to ensure that the boiler room is supplied with fresh air
ventilation that is suficient in accordance with local standards.
–
Before servicing, shut off the fuel supply and the power supply to the
burner.
–
The outer temperature of the boiler´s components can exceed 60 °C.
–
Check that the guide stop is installed before servicing.
–
Take great care when servicing. Trap and pinch risks can be present.
–
The boiler´s sound level can exceed 85 dBA during operation. Use ear
protectors when present in the boiler room
Safety directions
–
The electrical installation shall be made according to valid regulations
for heavy current and in a professional way, so that the risk of leaking
gas, ire or personal injury is avoided.
–
If another electrical connection is used than the one recommended by
Enertech, there might be a risk of material damage or personal injury.
–
Notice should be carefully taken by the installer that no electrical cables
or gas pipes get squeezed or damaged when installing or at service
–
If the boiler is provided with an opening door, this should be interlocked
with a door switch.
Acceptance inspection
–
Ensure that everything is delivered and that there is no transport
damage.
–
If there is anything wrong with the delivery, please report it to the
supplier.
–
Any transport damage should be reported to the forwarding company.
Preparations for installation
–
Ensure that the size and capacity range of the burner are suitable for
the boiler.
–
Power data on the data plate refer to the minimum and maximum power
of the burner.
172 155 15 08-01
Warning
!
