EnerSys ALPHA PowerBay+ Half Size BDFB, Technical Manual

Page: 7 / 52

7
C048-741-30 R01, Rev. B (01/2020)
4.0 4.0 Installation Installation
4.1 4.1 Installation Preparation Installation Preparation
THIS PRODUCT MUST BE INSTALLED WITHIN A
RESTRICTED ACCESS LOCATION WHERE ACCESS IS
THROUGH THE USE OF A TOOL, LOCK AND KEY, OR
OTHER MEANS OF SECURITY, AND IS CONTROLLED
BY THE AUTHORITY RESPONSIBLE FOR THE
LOCATION. THIS PRODUCT MUST BE INSTALLED AND
MAINTAINED ONLY BY QUALIFIED TECHNICIANS.
NOTICE :
ENSURE THAT THERE IS ADEQUATE GROUND AND
CEILING SPACE FOR PLACEMENT OF THE BDFB.
NOTICE
:
4.1.1 4.1.1 Elevated Operating Ambient Elevated Operating Ambient
Install the BDFB and associated equipment in an environment
compatible with the maximum ambient temperature (TMA) specified
by the manufacturer.
4.1.2 4.1.2 Reduced Air Flow Reduced Air Flow
Installation of the BDFB and associated equipment should be
such that the amount of air flow required for safe operation of the
equipment is not compromised.
4.1.3 4.1.3 Mechanical Loading Mechanical Loading
Mounting of the BDFB and associated equipment should be
such that a hazardous condition is not achieved due to uneven
mechanical loading.
4.1.4 4.1.4 Circuit Overloading Circuit Overloading
Give consideration to the connection of the equipment to the
supply circuit and the effect that overloading of the circuits might
have on overcurrent protection and supply wiring. Use appropriate
consideration for equipment nameplate ratings when addressing this
concern.
4.1.5 4.1.5 Reliable Earthing Reliable Earthing
Maintain reliable earthing of BDFB and associated equipment.
Pay particular attention to supply connections other than direct
connections to the branch circuit (e.g., use of power strips).
4.1.6 4.1.6 Disconnect Device Disconnect Device
A readily accessible disconnect device must be incorporated into the
building installation wiring.