7
016-564-B0-001, Rev. A1 (05/2022)
Enclosure, equipment or parts may be damaged or cause damage if used or installed
improperly.
CAUTION!
To avoid damage
:
•
Prior to installation, verify that the AC input voltage to the equipment matches with respect to voltage and frequency.
•
Prior to installation, verify that the output voltage from the equipment matches the voltage requirements of the
connected equipment (load).
•
Prior to installation, verify that the enclosure’s utility service panel is equipped with a properly rated circuit breaker for
use with the equipment inside. Refer to manufacturer’s recommendations.
•
Review and upgrade utility service panel circuit breaker requirements whenever the equipment within the enclosure is
changed.
•
Prior to installation, contact local utilities, local building maintenance departments, and cable/piping locator services to
ensure that installation does not interfere with existing utility or building cables/piping.
•
Do not exceed the output rating of equipment. Verify load requirements prior and during connection process.
Mechanical Safety
•
Power supplies can reach extreme temperatures under load.
•
Use caution around sheet metal components and sharp edges.
•
An accessible disconnect device needs to be provided with this product when permanently installed. If it is provided
with a power supply cord, the plug/ socket outlet needs to be readily accessible
Electrical Safety
•
Lethal voltages are present within the power supply and electrical boxes. Never assume that an electrical connection
or conductor is not energized. Check the circuit with a volt meter with respect to the grounded portion of the enclosure
(both AC and DC) prior to any installation or removal procedure.
•
Do not work alone under hazardous conditions.
•
A licensed electrician is required to install permanently wired equipment.
•
Input voltages can range up to 230VAC. Ensure that utility power is disabled before beginning installation or removal.
•
Ensure no liquids or wet clothes contact internal components.
•
This equipment works continuously.
•
This equipment meets IP14/NEMA 3R standards with the standard cover. With a vented cover, this equipment meets
NEMA 1 (indoor) standards.
