11
3.3 To Select the Drive Direction (Fig. 3)
• For tightening bolts, install the drive shaft
in the location shown in Figure 4.
• For loosening bolts, install the drive shaft
on the opposite side of the wrench.
3.4 Hex Sockets
WARNING
Use only hex sockets
designed for use with impact wrenches.
Standard hex sockets may shatter.
Serious personal injury could result.
3.4.1 To Install a Hex Socket
(Fig. 4)
• Position the hex socket (9) onto the drive
shaft (1).
• Install the retaining pin (10) and O-ring (11).
3.4.2 To Remove a Hex Socket
(Fig. 4)
• Remove the O-ring (11) and retaining pin
(10)
• Remove the hex socket (9) from the drive
shaft (1).
3.5 To Attach the Positioning Handle (Fig. 5)
• Secure the positioning handle (12) with
thumb screw or eyebolt (13 - varies
by model). Handle can be installed on
either side of wrench (as needed).
3.6 To Mount the Reaction Arm (Fig. 6)
The reaction arm can be rotated
incrementally through 360 degrees and
can maintain stability against a reaction
point up to full torque.
• Position the reaction arm (6) onto the
ridged end (14) of the tool.
• Press the latch (7) and slide the arm all
the way onto the tool. Release the latch
to secure the arm.
• To adjust the angle of the reaction arm
(6), press the latch (7) and slide the
arm off of the tool. Position the arm as
necessary.
Fig. 5
Fig. 4
Fig. 6
ENGLISH
