IM_SWi_EX_Rev14
11
Air Relief Instructions
If full pressure is not achieved an air-lock may be present
in the hydraulic system. Refer to the hand pump manual
for instructions for corrective actions.
Operating Conditions
Grease Limitations:
Minimum Temperature:
-5 °C [23 °F]
Maximum
Temperature:
40°C
[104 °F]
Hydraulic Tools:
Minimum Jaw Contact Temperature:
-30 °C [-22 °F]
Maximum Jaw Contact Temperature:
70 °C [158 °F]
3.6.3 SWi20/25TEEX Kit Contents
SWi20/25TEEXSSEX Single Kit - ATEX Support
Equipment
1 x SWi20/25TEEXA Spreading Wedge Wedgehead
1 x 700 bar [10 000 psi] Hydraulic Cylinder
1 x 700 bar [10 000 psi] ATEX Hydraulic Hose, 2 m
[78.8"] with 90 degree elbow
1 x 700 bar [10 000 psi] HP350SMINEX Sealed Hand
Pump with Gauge
1 x Set of Safety Blocks
1 x Pair of Stepped Blocks
1 x Hex Key
1 x Lanyard
1 x Instruction Manual
1 x Carry Case - 680 mm x 560 mm x 180 mm
[26.8" x 22.0" x 7.1"]
Gross kit Weight
27.5 kg [60.5 lb]
Tool only weight:
6.4 kg [14.1 lb]
SWi20/25TEEXSS Single Kit - Non-ATEX Support
Equipment
1 x SWi20/25TEEXA Spreading Wedge Wedgehead
1 x 700 bar [10 000 psi] Hydraulic Cylinder
1 x 700 bar [10 000 psi] Hydraulic Hose, 2 m [78.75"]
with 90 degree elbow
1 x 700 bar [10 000 psi] HP350S Sealed Hand Pump
with Gauge
1 x Set of Safety Blocks
1 x Pair of Stepped Blocks
1 x Hex Key
1 x Lanyard
1 x Set of Instruction Manuals
1 x Carry Case - 680 mm x 560 mm x 180 mm
[26.8” x 22.0” x 7.1”]
Gross kit Weight
27.5 kg [60.5 lb]
Tool only weight:
6.4 kg [14.1 lb]
SWi20/25TEEXTSEX Twin Kit - ATEX Support
Equipment
2 x SWi20/25TEEXA Spreading Wedge Wedgeheads
2 x 700 bar [10 000 psi] Hydraulic Cylinders
2 x 700 bar [10 000 psi] ATEX Hydraulic Hoses, 2 m
[78.8"] with 90 degree elbow
1 x 700 bar [10 000 psi] HP550DMINEX Sealed Hand
Pump with Gauges
2 x Sets of Safety Blocks
2 x Pairs of Stepped Blocks
2 x Hex Keys
2 x Safety Lanyards
1 x Instruction Manual
1 x Carry Case - 930 mm x 600 mm x 180 mm
[36.6" x 23.6" x 7.1"]
Gross kit Weight
38.8 kg [85.5 lb]
Tool only weight:
6.4 kg [14.1 lb]
SWi20/25TEEXST Twin Kit - Non-ATEX Support
Equipment
2 x SWi20/25TEEXA Spreading Wedge Wedgehead
2 x 700 bar [10 000 psi] Hydraulic Cylinders
2 x 700 bar [10 000 psi] Hydraulic Hoses, 2 m [78.75"]
with 90 degree elbow
1 x 700 bar [10 000 psi] HP550D Sealed Hand Pump
with Gauges
2 x Sets of Safety Blocks
2 x Pairs of Stepped Blocks
2 x Hex Keys
2 x Lanyards
1 x Set of Instruction Manuals
1 x Carry Case - 930 mm x 600 mm x 180 mm
[36.6” x 23.6” x 7.1”]
Gross kit Weight
38.8 kg [85.5 lb]
Tool only weight:
6.4 kg [14.1 lb]
Summary of Contents for Equalizer SWi12/14TMEX
Page 2: ......
