17
Figure 9, Fixed Blade Replacement
1
2
Key:
1. Fixed Blade Screws
2. Fixed Blade
10.6.2 Blade Replacement - Fixed Blade
Replace the fixed blade as described in the following
steps. Refer to Figure 9, items 1 and 2.
1. Be sure that the cutter piston is fully retracted. If not,
start the cutter and cycle the piston until it is fully
retracted.
2. Disconnect cutter from AC power supply to prevent
accidental motor start-up during the following steps.
3. Place the cutter horizontally on a stable work surface
with the handle facing upwards.
4. Remove the fixed blade screws.
5. Remove the worn fixed blade and replace it with the
new fixed blade.
6. Secure the new fixed blade using the two new fixed
blade screws included with the new fixed blade. Apply
Loctite 243 thread sealant (or equivalent) to threads.
Torque to 18 ft-lb [25 Nm].
7. Test cutter for proper operation before placing it back
into service.
Summary of Contents for EFBE7015
Page 23: ...Notes...
Page 24: ...WWW ENERPAC COM...
