ENERGY SUPPORT CORPORATION DTF-201, Operation Manual, Page: 6 / 34

1
1. Introduction
1-1 Introduction
The DTF-201 Oxygen Analyzer is a product of the latest ceramics production technology,
using a thick film sensor and digital signal processing technology. This Operation Manual
explains how to operate the DTF-201 oxygen analyzer.
Please read this manual thoroughly to ensure long, successful operation of your
SH-201-C Oxygen Analyzer.
1-2 Usage Caution Notices
・
Do not install the analyzer in a location subjected to vibration.
・
Do not apply water or volatile fluids to the analyzer.
・
Do not use sample gas containing corrosive gases (F, HF, CL
2
, HCL, SO
2
, H
2
S, etc.)
or poisonous materials (Si, Pb, P, Zn, Sn, As, etc.). These can shorten the life of the
sensor.
・
Do not use sample gas containing inflammable gas. The inclusion of inflammable gas
can cause deviation in the oxygen concentration measurement value.
・
The major usage of this oxygen analyzer is for atmospheric oxygen measurement at
boiler, Heating furnace.
・
1-3 Product Outline
The DTF-201 oxygen analyzer has the following features.
・
With one calibration of the air sample point is possible.
・
Compact size.(Small installation space.)
・
Easy maintenance.
・
Low power consumption by the sensor.(About 13 W for normal use.)
・
Short warm up time.
・
No power switch.