6
3. I
NSTALLATION
3.1
I
NSPECT
THE
C
ONTENT
OF
THE
B
OX
•
Inspect the exterior of the unit for shipping damage. Ensure that there is no damage to the door, door latches, ports, power
cord,
etc.
A
VD0313
• Remove the transport bracket screws (
A
) located on the bottom of
the
unit.
±3”
VD0304A
B
C
D
VD0314
• Remove the last retaining screws (
D
) of the transport brackets
and
discard.
• Inspect the inside of the unit for damage. Ensure that blower
assembly, heat recovery core, core filters, insulation, dampers,
prefilter and HEPA filter (EVO5 700 HRV HEPA and HRV 7.1
HEPA units only), etc. are all intact, then reinstall the door.
NOTE: On EVO5 700 HRV HEPA and HRV 7.1 HEPA units only,
write the installation date on the HEPA filter frame for future
reference (see illustration at right).
TO
P
DESSUS
FR
ONT
AV
ANT
Inst
al.
dat
e:
Dat
e d’inst
al.
:
__ / __ / ____
21
293
FR
ONT
AV
ANT
Inst
al.
dat
e:
Dat
e d’inst
al.
:
__ / __ / ____
VD0309
•
Unlatch, open (
B
) and remove (
C
) the unit door.
In order to prevent damages to the door hooks, do not open completely
the unit door; tilt it about 3” from the unit base and lift it up. See
illustration at right.
CAUTION
•
Remove the transport tape over the heat recovery core of the unit.
NOTE: Before proceeding to the installation, check the content of the box. If items are missing or damaged, contact the
manufacturer. Remove all packaging material from the unit.
