37
seconds to access the learn mode.
3.1 Learn a Command
1. Press the respective device key (eg.TV) of the device
which you wish to carry out programming.
2. Press he SET key for more than 3 seconds, then
release it, or press the Learn key for more than 3
seconds to access the learn mode.
3. Press the UP and Down key to select LEARNING in
the LCD menu, then press the OK key.
4. Press the UP or DOWN key to select LEARN KEY in
the LCD menu and then press OK.
The SELECT KEY is displayed on the LCD screen.
5. Select the (
target)
key which you wish to program (e.g.
Power). WAITING is displayed on the LCD screen.
6. Aim the IR window of the original remote control at the
IR receiver window of your new remote control
(Distance approx.50mm)
7. Press the original remote control key (eg.Power) until
SUCCESS is displayed. If failed is displayed on the
LCD screen, please repeat Steps 4-6.
8. Repeat Steps 4-6 to program other keys.
9. Press a device key (eg.TV) to exit the learning
operation once all the desired commands have been
programmed.
