5
2. front Panel
1.
PowER: Used to turn on/off the main power supply
2.
STANDBy INDICAToR: Used to visually show power state of the set top box, the led will turn red if
the set top box enters in standby mode:
Green = on
Red = standby
No light = off
3.
REmoTE CoNTRoL SENSoR: Used to receive the signal from the Remote Control.
4.
CHANNEL UP/DowN: Used to change channels without using the Remote Control.
5.
USB PoRT: Used to attach your external USB hub/card reader/storage device.
3. real Panel
1.
RF IN: This socket connects to your external aerial.
2.
RF LooP THRoUGH: This socket will bypass the RF signal to either your TV or another video
system.
3.
CoAXIAL: This socket connects to a coaxial socket on your surround sound system.
4.
VCR SCART: This socket connects to either a DVD or other video system.
5.
TV SCART: This socket connects to your TV.
6.
HDmI oUT This socket connects to HDmI in device.
7.
mAINS CABLE: This is used to connect to your main power supply.
1
2
3
4
5
6
7
1
2
3
4
5
