8/10
energysistem.com
NOTE:
It is not possible to control music playback from the speaker while using it in ?AUX? mode. To control playback
functions you will have to use the connected music player.
The maximum volume depends directly on the power of the signal transmitted by the source device.
FM radio
Before using the FM radio function, it is necessary to carry out a search of all stations available. The radio stations will
be saved to the speaker's internal memory. It is therefore not necessary to carry out a new search each time you switch
on the speaker. You will only have to do this if you place the device in a new location or if you change the frequency of
the saved radio station.
To carry out a search of all radio stations, press the Change function (14) button until the FM mode appears on screen.
The FM LED function indicator (15) will light up when the radio function is selected. Once you have done this, press and
hold the Change function (14) button for 2 seconds. The FM LED function indicator (15) flashes while carrying out the
search. Once the process is complete, the LED will glow as usual. The process may take a few minutes.
You can use an audio cable with mini jack plug (not included) as an antenna cable to improve the signal. To do so,
connect the above mentioned cable to the AUX port, return to FM mode and carry out a new seach of radio stations
following the steps explained above.
Press Next (5) or Back (3) to select one station from all saved stations. Radio stations will appear in the order in which
they were saved.
Note: The power adapter used to charge the device may interfere with the FM radio signal. We recommend maintaining
a distance of 50 cm between the power adapter and the speaker if the FM radio function is enabled and you are
charging the battery simultaneously.
Removable storage units (USB sticks/MicroSD cards)
Insert a removable USB stick or microSD card into the corresponding port or slot, (9) or (10), to play MP3 or WAV files.
Your Music Box 9+ enables the corresponding playback mode automatically. Once the removable storage unit has been
read, music playback will start. It will only take a few seconds. Do not remove the storage unit while the reading process
is in progress.
If you turn off the Music Box 9+ while playing the files of the removable storage unit, the internal memory will save the
point where you paused playback. If you connect the same removable storage unit once again, playback will resume
from where you paused it.
To skip to the previous or next track, press Back (3) or Next (5). You can also go to the next folder of your microSD card
/ USB stick. To do so, press and hold the Change function (14) button for two seconds.
Press and hold Next (5) or Back (3) while the device is playing a song to fast-forward or rewind it. As soon as you
release the button, playback will resume.
Note: We recommend not removing the removable storage unit while the reading process is in progress. Before doing
that, please change mode or turn off the speaker.
Playback mode (continuous or shuffle)
Press and hold the Play/Pause and Call control (4) button for 2 seconds to enable one of the playback modes available
(continuous or shuffle mode) while playing files from removable USB sticks and microSD cards.
The corresponding LED function indicator (15) flashes when in shuffle mode and glows permanently while continuous
playback is enabled.