6/10
energysistem.com
Switching on and off the device
Press and hold the On/Off button (1) for 2 seconds to switch on the device and you will see that the buttons light up.
The On/Off button (1) will glow while the device is on.
To switch off the device, press and hold the very same button for 2 seconds. At this point the buttons light up and turn
off.
Playback control
You can control music playback from the speaker itself. Press (6), Volume - (2), Back (3), Next (5) or
Play/Pause and Call control (4) to perform different playback actions. The (6) and Volume - (2) buttons will
flash when reaching the maximum and minimum volume levels.
To start, pause or resume playback, press the Play/Pause and Call control button (4).
To skip to the previous or next track, press Back (3) or Next (5).
Note: Bear in mind that you can only control playback from the connected music player while using AUX mode (audio-
in).
Note: You can find all information about playback control while TWS mode is enabled in the TWS section.
Sound settings
Switch on your Music Box 9+ and select the preferred EQ mode pressing the EQ mode button (13). You can choose
between the 2 following EQ modes:
Crystal Sound: This flat EQ mode is recommended to stream music in high fidelity.
Deep Bass: This EQ mode enhances bass response.
The last selected mode is saved into the product?s internal memory. The speaker enables this mode when switching it
on once again.
Charging the battery
The On/Off button (1) lights up red when the battery charge is below 10%. The button light starts flashing red when the
battery level is below 5%. You will hear a warning sound from time to time. Plug the provided power adapter cable into
the Charging port (7) of your Music Box 9+. Connect the adapter to the power socket. The Charge indicator (12) lights
up red and switches off when fully charged. The charging time is approximately 2 and a half hours.
Important:
Use the provided power adapter.
Do not leave your Music Box 9+ completely discharged for a long time.
Bluetooth® connection
Press Change function (14) until you find Bluetooth mode while your Music Box 9+ is on. Once you have done this, press
and hold the same button for 2 seconds until the "BT" LED function indicator (15) starts flashing. At this point, the
speaker and smartphone or tablet can be paired.
Once "Music Box 9+" appears on your device screen, press "connect". Both devices will be connected immediately and
without codes. You will hear a confirmation sound when both devices are synchronized and the "BT" LED function
indicator (15) will stop flashing and glow as usual.