ENERGY SISTEM M3500, User Manual

Page: 16 / 18

16
9. TROUBLESHOOTING
If you experience problems with this receiver or its installation, in the first instance please read carefully the
relevant sections of this User Manual and this Troubleshooting section.
Problem Possible solution
No power Check that the battery is properly charged. If not then charge the
battery by connecting the power adapter
Check that the player is switched on. Press the STANDBY button
No picture Check that the screen is switched on
Poor quality picture Check the disc for fingerprints and clean with soft cloth, wiping from
the center to the edge
Check that the disc is compatible with the TV format (PAL/NTSC)
Check the antenna cable and the antenna installation (using an
amplifier may improve signal quality)
Black and white picture Check that the disc is compatible with the TV format (PAL/NTSC)
Picture interference Place the unit as far away as possible from any sources of interference
or emission (e.g. radios, etc.)
Remote control not working Aim the remote control directly at the sensor on the front of the player.
Remove any obstacles between the remote control and the sensor.
Check the polarity of the batteries.
Replace the batteries if necessary
No sound Check the audio connections
If using a Hi-Fi amplifier, try another sound source
Clean the disc
The disc may be damaged. Try another one
Disc cannot be played Make sure that the disc is placed correctly in the disc tray
Improper functioning Strong interference may disturb normal operation of this unit. Just
reset the player by disconnecting and reconnecting the power cord