29
EN
G
LI
S
H
geTTINg sTaRTeD
POWER SUPPLY FOR THE UNIT
1.
Connect the unit as shown in “CONNECTIONS”.
2.
Insert 2 AAA batteries (supplied) into the battery compartment in the remote
control, taking care to follow the correct polarity.
3.
Connect the power cord to an AC mains outlet. Press the POWER button to turn on
the unit.
4.
Turn on the TV and set to the correct video-in source.
5.
To go to standby mode, press the POWER button. If the unit is not to be used for a
long time, please disconnect the power cord.
Note:
≥
The range of the remote control is about 5 meters.
≥
Replace the batteries when the remote control range starts to reduce.
≥
If the remote control is not to be used for a long time, remove the batteries to avoid
damage caused by battery leakage.
INSERTING A DISC
1.
Open the disc cover.
2.
Insert a disc, then close the disc cover. The unit will read the disc and start to play
it, or it will display a start menu.
INSERTING A USB DEVICE
Insert a USB device into the unit. Press the DVD/USB button on the remote control to
enter in USB mode and use the up/down buttons to select the multimedia file you want to
display. Press the OK button to confirm.
MaIN MeNU
Please read the following instructions carefully to understand the function of each
option.
When connecting the power supply for the first time, press the POWER key on the remote
control and the device will power on. Press SETUP to display this menu. There are five
function options in the main menu.
Summary of Contents for DVD D1
Page 1: ...21 ESPAÑOL User manual ...
Page 2: ......