© 1995-2013 Energy Saving Products Ltd.
© 1995-2013 Energy Saving Products Ltd.
Module HEB COM
Commissioning & User Guide (2/8)
Module HEB-COM-Commissioning-Report-and-User-Guide (2/8)
-2-
-2-
HE-B Commissioning Report
Hertz Output
Hertz Output
Outlet Velocity
Outlet Velocity
Static Pressure
Static Pressure
Cooling Mode:
Cooling Mode:
55-66 Hz
55-66 Hz
1250-1400 FPM
1250-1400 FPM
0.8-1.2”wc
0.8-1.2”wc
Heating Mode:
Heating Mode:
45-66 Hz
45-66 Hz
1100-1400 FPM
1100-1400 FPM
0.6-1.2"wc
0.6-1.2"wc
Constant Fan:
Constant Fan:
25-35 Hz
25-35 Hz
500-900 FPM
500-900 FPM
0.2-0.5”wc
0.2-0.5”wc
Quick System Setting Reference
Jumper Pin Settings
H1 Emergency Disconnect:
H1 Emergency Disconnect:
(Remove pin to activate)
(Remove pin to activate)
H3
H3 Timer:
Timer:
Activates auxiliary relay for 5
Activates auxiliary relay for 5
min every 24 hours.
min every 24 hours.
- Hertz will be displayed on the Variable Frequency Drive digital display.
- Hertz will be displayed on the Variable Frequency Drive digital display.
- Outlet velocity is based on ideal noise levels.
- Outlet velocity is based on ideal noise levels.
- Static Pressure reading must be taken perpendicular to airflow, minimum
- Static Pressure reading must be taken perpendicular to airflow, minimum
of 18” away from supply air collar of fan coil.
of 18” away from supply air collar of fan coil.
- Quick references should only be used to roughly set fan coil, not
- Quick references should only be used to roughly set fan coil, not
to be used as primary fan coil set up method.
to be used as primary fan coil set up method.
Note:
Note:
Useful Parameters
P000
P000 To unlock drive change to 5
To unlock drive change to 5
P002
P002 To display Hz output
To display Hz output
P030 (CFW10 - P008)
P030 (CFW10 - P008) Drive Heatsink Temperature
Drive Heatsink Temperature
P128
P128 To adjust constant fan speed
To adjust constant fan speed
P129
P129 TTo adjust cooling fan speed
o adjust cooling fan speed
P130
P130 To adjust heating fan speed
To adjust heating fan speed
P131
P131
To adjust dehumidification fan speed
To adjust dehumidification fan speed
LED Description
LED 1 (Green Light)
LED 1 (Green Light)
- Pump timer
- Pump timer
See page 30 of the HE-B
Installation Manual for fan
speed adjustment instructions
ON: (ACTIVE)
PUMP TIMER STATUS
ON: (INACTIVE)
OFF:
2 SECONDS
W1 W2 C
R Y2 Y1 D O/B
G
AUXILIAR
Y RELA
Y
(HEA
TING)
L2
L2
N L1 L1
A3
A2
A1
L
N
J5
J4
J3
J2
N
C
Ri
Ro
H1
J9
J1
HEB CIRCUIT BOARD
THERMOSTAT
EMERGENCY
DISCONNECT
C
R
Y1
W2
W1
FZ
FZ
Y2
C
F1
ON
OFF
H3
TIMER
J7
F
C
H
G
24v OUTPUT
318.28 Pcbw-002sep-043
L2
L2
N L1 L1
Red
ON: (ACTIVE)
PUMP TIMER STATUS
ON: (INACTIVE)
OFF:
2 SECONDS
W1 W2 C
R Y2 Y1 D O/B
G
AUXILIAR
Y RELA
Y
(HEA
TING)
L2
L2
N L1 L1
A3
A2
A1
L
N
J5
J4
J3
J2
N
C
Ri
Ro
H1
J9
J1
HEB CIRCUIT BOARD
THERMOSTAT
EMERGENCY
DISCONNECT
C
R
Y1
W2
W1
FZ
FZ
Y2
C
F1
ON
OFF
H3
TIMER
J7
F
C
H
G
24v OUTPUT
318.28 Pcbw-002sep-043
L2
L2
N L1 L1
Red
=
=
Light On
Light On
=
=
Light Off
Light Off
On: (Active)
On: (Active)
On: (Inactive)
On: (Inactive)
Off:
Off:
Pump Timer Status:
Pump Timer Status:
