Maple Leaf Mews
Kingston 10
JAMAICA
the rear middle leg out and connect it
with the two adjacent rear legs.
with the tank brackets.
Attention: Put
The cross bars can fasten the rear legs
two angle irons together as the rear
well for fear that the strong wind
middle frame and then connect them
destroys the frames.
with the tank brackets.
The assistant
bars are collected with the reflectors by
the same screw. Take the last rear leg out
and connect it with the tank brackets.
Then use the assistant bars to connect
the rear and front legs in the same way
mentioned above.
Fig 7
Fig 8
Step 7.
At last connect the cousins to the
Step 8.
Turn the frame over and put it on
corresponding front and rear legs.
the ground at the installation angle
between the front legs and rear legs.
www.energyplusja.com
Page 17 of 48
