1.2 Introduction
The Energy Eye IR-05 Wireless Ceiling Mounted PIR sensor has been created
using a proprietary design to appease the most discerning hotel operations. This Ceiling
mounted motion sensor features a wide coverage detection pattern to make sure that
guests are accurately detected within the room, even while in bed.
The special design has been created to replicate the standard smoke detector
found in hotel guestrooms. This design helps keep the Energy Management operation
discreet and reduces the incidence for guests discomfort or the possibility of confusing
the motion detector with a camera device.
This sensor has been designed with the same proprietary radio coding that is
found in other high quality Energy Eye wireless components and will not interfere with
other sensors or wireless devices within the guestroom. The sensor is designed solely
for use with the Energy Eye Controllers (EERX/EERXS) and does not function with any
other wireless components or security systems.
1.3 General Specifications
RF Transmitter
315 MHz
Voltage Input
4.4V ~ 6V
Current Draw (Sleep Mode)
115uA
Current (Transmit)
6mA
Transmission Range
30 Feet ~ 100 Feet
Transmission Encoding
Internal IC w/ 4 Billion Combinations
Battery Specifications
(2) X LiMn02 CR123A 1400mAH
Recommended Batteries
Sanyo/Panasonic/Energizer
Calculated Battery Life
1 year @ 60 Tx/Hour
Dimensions (Diameter X
Height)
10.5 cm x 5 cm
Certifications
FCC Part 15B, Industry Canada RSS