Extended Use
Run Time
Mounting To Wall
To keep light sticks fully charged, return them to the dock after
portable use. While they are in the dock, they will recharge
whether the mode switch is set to AUTO, OFF , LOW , or ON
(as long as power is present).
Using Alkaline Batteries
In the event of a prolonged power outage,
you can use regular AAA Energizer®
Max
®
alkaline batteries in your
Energizer
®
Light on Demand
™
sticks.
However, when power returns, REMOVE THE ALKALINE
BATTERIES and replace the rechargeable battery pack in
order to recharge. The dock will NOT recharge regular
alkaline batteries. (See warning on page 3.)
1. Remove the back of the light
stick to access the rechargeable
battery pack.
2. Pull the white ribbon to remove
the rechargeable battery pack
and pull up on the wire connection
to disconnect from the light stick.
3. Flip the contact holder so
the metal contacts face down.
4. Insert 3 AAA size alkaline
batteries as indicated.
5. Replace the back of light
stick. Do not throw away
the rechargeable battery
pack; re-insert when the
power returns.
FLIP
To Insert Alkaline Batteries:
PULL
Using Rechargeable Battery Pack
Area Light (4 LEDs)
5 Continuous Hours
Per Light Stick
Per Light Stick
10 Continuous Hours
Flashlight (2 LEDs)
Using 3 AAA Alkaline Batteries
Area Light (4 LEDs)
18 Continuous Hours
Per Light Stick
Per Light Stick
25 Continuous Hours
Flashlight (2 LEDs)
2. Pre-drill holes in the
mounting surface with a
3/16" size drill bit.
3. Insert the 3 plastic wall
anchors and tap them in
until they are snug.
1. Use the enclosed
template to mark the
screw hole locations.
Wall
Anchors
W
A
LL
4. Turn the screws into the
anchors, stopping about 1/8"
before the screw is flush with
the wall.
5. Center the unit over the
screws and slide down to
secure. If the unit is not
snug to the wall, lift it off
and tighten the screws
slightly until you have the
ideal fit.
Screws
1/8"
1/8"
You will need:
mounting template
(included),
3 wall anchors
(included)
, 3 self tapping screws
(included),
hand drill, 3/16" size drill bit, screwdriver
