________________________________________________________________________________________________________
Energizer
Solar Inverter | Installer Manual [3]
Danger.
Risk of electric shock!
Danger to life due to high voltage.
There is residual voltage in the inverter which needs 5 minutes
to discharge. Wait 5 minutes before you open the upper lid or the DC lid.
Read the manual.
Product should not be disposed as household waste.
2. Safety
2.1 Appropriate Usage
This inverter is designed and tested in accordance with international safety requirements. However, certain safety
precautions must be taken when installing and operating this inverter. The installer must read and follow all instructions,
cautions and warnings in this installation manual.
-
All operations including transport, installation, start-up and maintenance, must be carried out by qualified, trained
personnel.
-
The electrical installation and maintenance of the inverter shall be conducted by a licensed electrician and must
comply with local wiring rules and regulations.
-
Before installation, check the unit to ensure it is free of any transport or handling damage, which could affect
insulation integrity or safety clearances. Choose the installation location carefully and adhere to specified cooling
requirements. Unauthorised removal of necessary protections, improper use, incorrect installation and operation
may lead to serious safety and shock hazards or equipment damage.
-
Before connecting the inverter to the power distribution grid, contact the local power distribution grid company to
get appropriate approvals. This connection must be made only by qualified technical personnel.
-
Do not install the equipment in adverse environmental conditions, such as in close proximity to flammable or
explosive substances, in a corrosive environment, where there is exposure to extreme high or low temperatures,
or where humidity is high.
-
Do not use the equipment when the safety devices do not work or are disabled.
-
Use personal protective equipment (PPE), including gloves and eye protection during the installation.
-
Inform the manufacturer about non-standard installation conditions.
-
Do not use the equipment if any operating anomalies are found. Avoid temporary repairs.
-
All repairs should be carried out using only approved spare parts, which must be installed in accordance with
their intended use and by a licensed contractor or authorised service representative.
-
Liabilities arising from commercial components are delegated to their respective manufacturers.
-
Any time the inverter has been disconnected from the public network, please be extremely cautious as some
components can retain charge sufficient to create a shock hazard. Prior to touching any part of the inverter please
ensure surfaces and equipment are under touch safe temperatures and voltage potentials before proceeding.
2.2 PE Connection and Leakage Current
PV System Residual Current Factors
