background image

25

series

Chapter 5 — Maintaining Your eZG7250 Generator

Proper maintenance ensures safe, economical and trouble-free operation. Improper 

maintenance may cause the generator to malfunction and can lead to serious injuries. 

Contact Energizer Power Customer Support if you have any maintenance questions.

5.1 Maintenance Schedule

Item

Task

Daily

EVERY 

20 

HOURS

EVERY

50 

HOURS

EVERY 

100 

HOURS

EVERY 

300 

HOURS

General 

Inspection

Engine 

Lubricants

Inspect Oil Level

Replace

• **

Air Filter

Inspection

Cleaning

Sediment 

Cup

Cleaning

Spark Plug

Inspection &

Cleaning

Replacement

Valve Clear-

ance

Inspection & 

Adjusting

Combustion 

Chamber

Inspection & 

Adjusting

Fuel Tank and 

Strainer

Cleaning

Fuel Line

Clean every two months (replace if necessary)

** For first use of the generator.

5.2 General Inspection Tips

1.  Look for fuel leaks around the fuel tank, fuel hose, fuel valve and carburetor. 

Close the fuel valve and repair leaks immediately.

2.  Look and listen for exhaust leaks while the engine is running. Have all the 

leaks repaired before continuing operation.

Summary of Contents for eZG3500













































Reviews: