Energetics POWER RUN 2010HRC, Manual, Page: 28 / 145

28
TREADMILL TROUBLE SHOOTING GUIDE
PROBLEM POSSIBLE CAUSES CORRECTION
Treadmill will not start 1. Not plugged in
2. Safety key not attached
correctly
3. Treadmill circuit breaker
tripped
4. On/Off switch not turned on
5. Auto shut down timed out
1. Plug into suitable outlet
2. Insert Safety pull pin
3. Reset circuit breaker
4. Tunr on On/Off switch
5. Unplug and re-plug electrical
cord
Treadmill belt slipping 1. Walking belt too lose
2. Deck needs lubrication 1. Tighten walking belt
2. Lubricate belt and deck
Treadmill noisy 1. Loose hardware
2. Motor straining
3. Clicking sound
– roller
knocking
1. Tighten visible screws, nuts
and bolts.
2. Check belt tension. 3-finger
test.
3. Adjust rear roller -check the
tension
Inaccurate pulse rate 1. Too much hand movement
2. Palms too wet
3. Gripping handgrips too tight
4. Wearing rings 1. Stand on side rails to obtain
accurate pulse reading
2. Dry palms
3. Grip using moderate
pressure
4. Remove all rings