3.6V Li-Ion SCREWDRIVER ENS460DRS
TERMS OF USE
When all precautions have been taken and the previous operations were done, you can start working.
Always secure the work piece especially if it is small and the sheets.
Use the appropriate drill bit and the material at the correct speed.
Stay in the extension of the machine, perpendicular to the surface to be drilled.
CARE AND MAINTENANCE
This machine requires no special mechanical maintenance such as greasing the bearings.
Do not try to open or disassemble your drill or feeder to intervene yourself. Do not open and replace the
battery cells.
Do not let the drill dead load.
Always use the correct charger recommended. Improper use may cause risk of electric shock,
overheating or leakage of electrolyte. To protect the batteries from damage, do not expose to
temperatures above 4
0℃
Cleaning of plastic parts is unplugged charger and battery removed, using a soft damp cloth and a mild
soap.
Never immerse the machine and do not use detergent, alcohol, gasoline, etc..
In case of problems or for a deep cleaning, consult the manufacturer, its service agent or a similarly
qualified person to avoid a hazard.
GUARANTEE
This ENERGER product carries a guarantee of 12 months.
If your product develops a fault within this period, you should, in the first instance contact the retailer
where the item was purchased.
This guarantee specifically excludes losses caused due to:
- Fair wear and tear
- Misuse or abuse
- Lack of routine maintenance
- Failure of consumable items
- Accidental damage
- Cosmetic damage
- Failure to follow manufacturer’s guidelines
- Loss of use of the goods This guarantee does not affect your statutory rights.
This guarantee is only valid in the UK. For any enquiries relating to the guarantee please refer to your
retailer.
