TERMS OF USE
When all precautions have been taken and the previous operations were done, you can start working.
Always secure the work piece especially if it is small and the sheets.
Use the hammer drill suitable for the material.
Drilling:
In the woods, a burned area indicates an inappropriate speed or a bit sharpened improperly.
In steel, lubricate to prevent overheating and premature wear of the drill.
In steel, it is recommended to drill out regularly to remove chips and cool the drill. For large holes, make pilot
holes.
Hammer or hammer drilling
In the materials (concrete, ...), stay in the extension of the machine, perpendicular to the surface to be
drilled. Use the auxiliary handle to cash the couple, especially for large diameters. Hold the unit firmly with
both hands.
CARE AND MAINTENANCE
Keep the ventilation openings clear and clean the product regularly. This machine requires no special
mechanical maintenance such as greasing the bearings.
If something unusual occurs during use, switch off the supply and disconnect the plug. Inspect and repair the
tool before using it again. The repairs must be carried out by a qualified technician.
Repair of the tool must only be carried out by a qualified repair technician.
Repair or maintenance by unqualified personnel can lead to a risk of injury.
Use only identical spare parts for repairing a tool.
Caution!
If the supply cord of this power tool is damaged, it must be replaced by a specially prepared cord available
through the service organization.
Care and cleaning
Cleaning of plastic parts is disconnected machines, using a soft damp cloth and a mild soap.
Never immerse the machine and do not use detergent, alcohol, petrol, etc..
In case of problems or for a deep cleaning, consult the manufacturer, its service agent or a similarly qualified
person to avoid a hazard.
STORING
Store the machine, operating instructions and where necessary the accessories in the original packaging. In
this way you will always have all the information and parts ready to hand.
Pack the device well or use the original packaging in order to avoid transit damage.
Always keep the machine in dry place.
750W ROTARY HAMMER ENB569DRL
