HAMMER/DRILL SWITCH
The hammer/drill switches can switch the drill, hammer and hammer/ drill functions.
There is a lock knob in hammer/ drill switch, please depressed it first to preventing any unintentional
adjusting.
WRNING!
Please check and make sure the function switch has been fixed by locking knob after each adjustment.
To set the function, please use below hammer/drill
function mode.
Hammer drilling mode:
Set the
hammer/drill switch
to the position
This setting is recommended for use when drilling hole
s
in concrete and other masonry products. The hammer
action will be in operation while simultaneously the drill
bit rotates
Hammer mode:
Set the
hammer/drill switch
to the position
This setting is recommended for use when you desire a
hammer action without the accessory rotating which is
ideal for “chiseling or chipping” away at masonry
products, chisel accessory bits should be used.
Drilling mode:
Set the hammer/drill switch to the position .
This setting is recommended for use when you desire the
accessory to rotate without hammer action. Ideal for
drilling into timber or steel when the correct accessories
for such materials are used.
750W ROTARY HAMMER ENB569DRL
