background image

 

710W PLANER    ENB466PLN

 

Vibration and noise reduction   

 

To reduce the sanding of noise and vibration emission, limit the time of operation, use low-vibration and 
low-noise operating modes as well as wear personal protective equipment.   
Take the following points into account to minimize the vibration and noise exposure risks: 
1.Only use the product as intended by its design and these instructions.   
2.Ensure that the product is in good condition and well maintained.   
3.Use correct application tools for the product and ensure they in good condition.   
4.Keep tight grip on the handles/grip surface.   
5.Maintain this product in accordance with these instructions and keep it well lubricated (where appropriate). 
6.Plan your work schedule to spread any high vibration tool use across a number of days. 
 

Emergency  

 

Familiarise yourself with the use of this product by means of this instruction manual. Memorise the 
safety directions and follow them to the letter. This will help to prevent risks and hazards.   

1.Always be alert when using this product, so that you can recognise and handle risks early. Fast intervention 
can prevent serious injury and damage to property.   
2.Switch off and disconnect from the power supply if there is any malfunction. Have the product checked by a 
qualified specialist and repaired, if necessary, before you put it into operation again. 
 

Health Surveillance 
 

All employees should be part of an employer’s health surveillance scheme to help identity any vibration related 
diseases at an early stage, prevent disease progression and help employees stay in work. 

 

Residual risks   
 

Even if you are operating this product in accordance with all the safety requirements, potential risks of injury 
and damage remain. The following dangers can arise in connection with the structure and design of this 
product:  
1. Health defects resulting from vibration emission if the product is being used over long periods of time or not 
adequately managed and properly maintained.   
2. Injuries and damage to property due to broken application tools or the sudden impact of hidden objects 
during use.   
3. Danger of injury and property damage caused by flying objects. 

 

WARNING!  
 

This product produces an electromagnetic field during operation! This field may under some circumstances 
interfere with active or passive medical implants! To reduce the risk of serious or fatal injury, we recommend 
persons with medical implants to consult their doctor and the medical implant manufacturer before operating 
this product! 

 

Important note 
 

Be sure the supply is the same as the voltage given on the rating plate. Remove the mains plug before 
carrying out any adjustment or servicing. 

Intended use 

 

This planer is designed for planing wood surfaces or similar materials, and removing old paint with the 
exception of any other material having risk

 

ignition, explosion or release of hazardous or dangerous to the 

user or the environment.

 

Summary of Contents for ENB466PLN



















Reviews: