810W 115mm ANGLE GRINDER ENB461GRD
Fig.1
Fig.3
1 DISC GUARD
CAUTION!
For both cutting and grinding, the
appropriate guard must be used.
The position of the disc guard can be adjusted to suit
the working conditions.
To do this, please follow below steps:
1. Loosen the hexagon bolt with the hex wrench.(Fig.1)
2. Turn the guard to the desired position.(Fig.2)
3. Retighten the screw firmly.
WARNING
The closed disc guard should always point towards
the user to protect him from sparks and chippings
2. REMOVING THE GUARD
Never remove the guard for any working
conditions.
To remove it, take off the disc and both flanges first.
Loose the hexagon bolt with the hex wrench and rotate
the guard to align the projections with the gear case cut
outs, and then remove the guard.
To re-fit the guard, repeat this process in reverse. Keep
all parts in a safe place
3. AUXILIARY HANDLE
CAUTION!
The machine should only be used with both
hands.
Depending on the working method, the Auxiliary handle
can be mounted in two different positions on the
grinding head.(Fig.3)
Do not continue to use an auxiliary handle if it is
damaged.
Fig.2
