8
SIS-PWM Silver Shield(TM) advanced
surge protector with power meter
All brands and logos are registered trademarks of their respective owners
•
It is possible to connect the SIS-PWM to the power source via
other multi-plugs, surge protectors, voltage regulators or UPS.
7. Software installation
a. Insert CD with the software into the PC CD-ROM drive.
b. If for any reason the automatic setup does not work, then open
CD-ROM drive in the “My computer” window and launch SETUP.EXE
from the CD.
Follow instructions of the installation software.
8. Connection of other devices to the SIS-PWM
•
The five sockets of the SIS-PWM are used for measuring and
calculation of the total energy and other characteristics, consumed by
the connected equipment. The sum power consumption will be
calculated for all the equipment connected. The sixth socket located on
the opposite side of the main power switch, is not being measured. The
equipment, which power consumption is not needed to be registered,
may be connected into it.
•
Multi-plugs and/or surge protectors, if connected to the SIS-
PWM, consume a few energy and influence on measurement results,
therefore it is not suggested to use it.