11
EG-PM1W-001 SMART HOME SOCKET
All brands and logos are registered trademarks of their respective owners
You can find the IP in the
Wireless Network
page in the web
interface. You can also find the IP by using the
LAN find
utility in
the
Power Manager
software. The
PM port
and
PM password
need
to be set in advance in the
System
page. Usually the
PM port value
is 5000. The password shall contain between 1 and 8 characters.
In
Power Manager
, Select
Device->Add device
from the main
menu. Enter the device name, IP address, PM port, PM password,
and then click OK. After a few seconds, the EG-PM1W-001 icon
will appear in the main window and the connection status will turn
green. EG-PM1W-001 is now connected and can be managed.
Note, antivirus or firewall software may block connection to the EG-
PM1W-001. Please, configure your antivirus/firewall to allow
connections to the IP address and port of your EG-PM1W-001.
3.4. Setting up EnerGenie.com device interface
Log into the EG-PM1W-001 web interface and go to the
Socket
page.
Click
Register
. The
energenie.com
login page will be opened in a
new browser window.
Click
New account
. Complete the form in newly opened page. After
clicking
Register
, a new page with your EG-PM1W-001 device will
appear. Click the device icon to open the device page from where
you may control the device.
