10
EG-PM1W-001 SMART HOME SOCKET
All brands and logos are registered trademarks of their respective owners
In the “
Wireless WAN (Client) Setting
” page select the SSID of
your network, and enter your
Pass phrase
(see Figure #4).
In order to ensure that the repeater network is secure, and to allow
for seamles
s roaming between the host and repeater’s network, it
is recommended to use the same encryption type and password of
the host WLAN network. In this case, leave
Set the AP security
with this information
option checked.
Click “Apply”. At this point, the EG-PM1W-001 should be in WiFi
repeater mode. The default
SSID is “
EG-PM1W_xxxxxx
”. You can
change the repeater’s SSID to the SSID of your host network, WiFi
channel, or encryption type and password in the
Wireless Network
page.
3.3. Power Manager software installation
Before setting up the
Power Manager
software, you need to
configure the access to the EG-PM1W-001 web interface (see
sections 3.1 - 3.2).
Insert the
Power Manager
CD into the PC CD-ROM drive and run
setup.exe. If your laptop does not have CD-ROM player, just
download the latest software from
www.energenie.com
and run the
installer package.
In order to connect the EG-PM1W-001 with the
Power Manager
software, you need the IP, PM port and PM password settings.
