14
System Care
The UV-MAX ULTRA system is designed for repeat performance with consistent results.
Based on system designs, minimal maintenance is required. Adherence to the following
regular service of your system should provide years of disinfection.
Each Duty Cycle
1. Inspect the system interior, exterior, and lamps for clean conditions
2. Clean as needed
Monthly
1. Inspect the system interior, exterior, and lamps for clean conditions
2. Clean as needed
3. It is recommended to test system performance using an ATP meter
Bi-Annual
1. Inspect the system interior and exterior lamp for clean conditions
2. Clean as needed
3. It is recommended to test system performance using an ATP meter
“Service Machine” Message
1. Every 8 running hours it is recommended that lamps be wiped down with clean cloth
and isopropyl or rubbing alcohol. This will remove any debris that may have
accumulated on the lamp. Once cleaned, you can reset this message by pressing
USER SETTINGS button followed by RESET SERVICE LIGHT
Note: The above steps are listed as the basic level of care, should the system be utilized
in a heavy work environment, further care may be required.
