Energate Z100 P2, Operating And Installation Manual

Page: 52 / 64

ZIGBEE Link Info Screen (continued)
•
STATUS: The label inside the box describes the status of the communication link
Possible labels are:
SEARCHING FOR RADIO SEARCHING FOR NETWORK
JOINING NETWORK SEARCHING FOR TRUST CENTER
WAITING FOR SECURE LINK SEARCHING FOR ESP
WAITING FOR VALID CONNECTION CONNECTION ACTIVE
At the right end of the title bar of the ZIGBEE LINK STATUS box is the Status Code. For additional
information about the Status Code please consult your utility.
Other information provided:
MAC: IEEE 802.15.4 EUI Media Access Control address.
IC: Installation Code, which identifies the device. Your utility must know the MAC address and the
Installation Code of a thermostat in order to be able to communicate with it. Typically, your utility
will know these items before a thermostat is connected for the first time. If your utility does not
have this information, or problems are encountered during connection, the installer can read the
MAC address and Installation Code from the Link Info screen and inform your utility.
Pressing the EXIT tab in either the Device Info screen or the ZIGBEE Link Info screen takes you
back to the Setup Menu.
Page 52