www.enerdrive.com.au
Page 13
Section 10 - Specifications
12.8V
≥2000 Cycles
0 - 45˚C
3.90 ± 0.03V
3.60 ± 0.05V
Discharge below release voltage
200A @ 25˚C ±5˚C for 30 mins 250A @ 25˚C ±5˚C for 15 mins
100A @ 25˚C ±5˚C for 30 mins
100A @ 25˚C ±5˚C for 30 mins
-20˚C ~ 60˚C
11.0 ~ 14.60V approx.
450A for 1.0s
250A for 1.0s
≤11.20V
14.20 ~14.60
13.50 ~13.80
150A @ 25˚C for 30mins
190A @ 25˚C for 30mins
80A @ 25˚C for 30mins
80A @ 25˚C for 30mins
40~100A
80~120A
20~50A
20~60A
200Ah
300Ah
125Ah
100Ah
SPECIFICATIONS: Enerdrive B-TEC 12v-G2 Lithium Battery Technical Data - 12 VOLT
EPL-100BT-12V-SLIM
Standard Charge Specification (Lithium profile charger required)
Standard Discharge Specification
Circuit Protection
Nominal Voltage
Nominal Capacity
Battery Charge Temperature
Normal Charge Voltage CV/CC*
Standby (Float) Voltage
Maximum Charge Current
Maximum Discharge Current
Pulse Discharge Current
Discharge Cut-Off Voltage
Over-Charge Protection Per Cell
Over-Charge Release Per Cell
The battery is supplied with a LiFePO4 Battery Management System (BMS) that can monitor and optimise each single prismatic cell during charge & discharge,
to protect the battery pack from overcharge, over discharge & short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery.
Battery Discharge Temperature
Battery Output Voltage Range
Nominal Charge Current
for Maximum Life
Cycle Life (DOD - 80%
under controlled conditions)
EPL-125BT-12V-G2
EPL-200BT-12V-G2
EPL-300BT-12V-G2
2.80V ± 0.05V
Protection to 65˚C ± 5˚C
Protection to 50˚C ± 5˚C
Protection to 55˚C ± 5˚C
Protection to 45˚C ± 5˚C
Auto release after 5s
Approx. 12.5kg
551mm
318mm
318mm
165mm
240mm
165mm
232mm
505mm
505mm
521mm
521mm
280mm
288mm
253mm
261mm
173mm
272mm
173mm
265mm
110mm
240mm
Approx. 15.5kg Approx. 16.2kg Approx. 25.0kg Approx. 26.0kg Approx. 38.2kg Approx. 39.4kg
≤3% per month
≤30 days - 20˚C to 60˚C, 5 ~ 75% RH
≥90 days - 10˚C to 45˚C, 5 ~ to 75% RH
Approx 10s Auto Release
Disconnect Load
220A for 30s - 450A for 1s
280A for 25s - 400A for 3.5s
110A for 30s - 450A for 1s
110A for 30s - 450A for 1s
3.20V ± 0.05V
Apply Charge/Voltage ≥12.8v
Over-Charge Protection
Over-Discharge Protection
Over Current Protection
Over-Charge Release Method
Discharge Over Current
Protection Reset Time
Over Current Release Method
Over Temperature Protection
Battery Discharge Over Temp
Battery Charge Over Temp
Short Circuit Protection
Self-Discharge Rate
Mechanical Characteristics
Without Tray
Without
Tray
Without
Tray
Without
Tray
With
Tray
With
Tray
With
Tray
Storage Information
Dimensions
Temperature & Humidity Range
Weight
Over-Discharge Protection Per Cell
Over-Discharge Release Per Cell
Over-Disharge Release Method
Length
Width
Height
