ENERAC 700, Instruction Manual

Page: 66 / 74

66
OXYGEN 2
ELECTROCHEMICAL
(High Range – option) 0 – 25% 0.1% 0.1% ABSOLUTE OR
0.2% OF READING
COMBUSTIBLES
(Single Range option) 0- 4% 0.01% 10% OF READING OR
0.02%
STACK TEMPERATURE
TYPE K T’COUPLE 0 – 2000 F. (1100 C) 1 F (1 C.). 5 F. OR 2% OF
READING
AMBIENT
TEMPERATURE 0 – 150 F. (65 C.) 1 F. 3 F.
STACK DRAFT
PIEZORESISTIVE +10” - -40” WC. 0.1” WC. 0.3” OR 5% OF
READING
STACK GAS VELOCITY
S TYPE PITOT TUBE 0 – 200 FT./SEC (2” WC.) 1 FT./SEC MEETS EPA METHOD 2
COMPUTED PARAMETERS
PARAMETER RANGE RESOLUTION ACCURACY
COMBUSTION
EFICIENCY 0 – 100% 0.1% 0.5% OR 2% OF
READING
CARBON DIOXIDE
(NON – INFRARED) 0 –40% 0.1% CALCULATED FROM
O2
EXCESS AIR 0 – 1000% 1% CALCULATED FROM
O2
OXIDES OF NITROGEN
(NOX) NO + NO2 RANGES 0.1% (SEM SENSORS)
1% NO + NO2 SPEC’S
EMISSIONS 1
(CO, NO, NO2, NOX,
SO2) 0 – 2500 MG/M3 2 MG/M3 CALCULATED BASED
ON PPM, O2 AND FUEL
EMISSIONS 2
(CO, NO, NO2, NOX,
SO2) 0.00 – 99.99 LBS/MBTU 0.01 LBS/MBTU CALCULATED BASED
ON PPM, O2 AND FUEL
EMISSIONS 3
(CO, NO, NO2, NOX,
SO2) 0.00 – 99.99 GMS/BHP-
HR 0.01 GMS/BHP-HR CALCULATED BASED
ON PPM, O2 AND FUEL
EMISSIONS 4
(VELOCITY OPTION)
(CO, NO, NO2, NOX,
SO2 & CO2) 0 .00 – 99.99 LBS/HR
0-99.99 TONS/DAY
(CO2)
0.01 LBS/HR
0.1 TONS/DAY (CO2)
CALCULATED BASED
ON PPM, O2, STACK
VELOCITY AND FUEL
STACK GAS FLOW
RATE 0 – 65,000 CFM 1 CFM CALCULATED BASED
ON PPM, O2, STACK
VELOCITY AND FUEL