www.ener-j.co.uk
1. Make sure electricity is cut off during the installation.
2. The switch must been installed without electricity,
electricity must be turn on after the installation(cover the
glass touch panel), touch for test after 10 seconds or the
switch will not work well.
password, then select
Confirm
.
13. If a blue box appears at the top of the screen it means
you’re currently not connected to a Wi-Fi network.
14.
Once you select Confirm after entering your password, the
app will start to pair the Wi-Fi Switch to your app.
15. If you get a message that says “Failed to Add” it means that
the connection has failed. You may have to enter the Wi-Fi
Switch into pairing mode again, and repeat steps 8 through
11.
16. Once your Wi-Fi Switch successfully connects to the app,
the below screen will pop up and you can change the
name of your Wi-Fi Switch/Device.
For Example: 16 Fixture. It’s best to make this simple so
that if you would like to connect this to your Alexa App
or Google Home, it will be easier for the smart assistant to
understand which light you would like to control.
After naming your Wi-Fi Switch, select
Done
.
17. You’re now able to control your Wi-Fi Switch in the
Enerjsmart
app.
1.
Install ENERJSMART app into smartphone or tablet device
or scan the QR code, download and install into smartphone
or teblet device.
2. Download an app called
ENERJSMART.
3. Once app is downloaded, open the app and select
Register.
4. The app should automatically detect your country code.
If not, please select the country code for your country of
residence.
5. Enter either your email address or phone number. (If you
enter your phone number you will be sent a verification text
message which you will need in the
Next step
).
6. If you’re setting up using a phone number, please enter
the verification code that was sent to your phone and your
desired password, then select
Confirm
.
7. If you’re setting up using an email address please enter
your desired password, and select
Confirm
.
8. You have now successfully created an account and you’re
now ready to start setting up your Smart bulbs and fixtures.
9. Select the Plus (
+
) in the top right corner to add a device.
10. Select type of Device you want to add.
For reference, we are showing with
Wi-Fi Switch
.
11. Connect your Wi-Fi Switch to a power source. To enter
pairing mode, turn the Wi-Fi Switch on and then off for 3-5
seconds at a time. Do this 3 times. The indicator light will
begin blinking rapidly once in pairing mode.
Similarly for other type of devices, there will be different
pairing mode. Ensure device is in pairing mode for APP to
connect with it.
12. Connect to your desired Wi-Fi network, enter your
How to Pair the product to the APP
Now you can use Google’s voice-activated speaker to control
your Smart Home Sockets and adaptors. With the Google
Assistant, you can turn on lights without pressing a button.
1. Setup
Start by getting the Google Home app and setting up your
Google Home if you have not done this already.
2. Add ENERJSMART Action
In the Google Home app, tap the menu icon and select Home
Control. Then tap the + button to see a list of Action tapping
ENERJSMART to select the Action.
3. Link you ENERJSMART Account
Now follow the in-app instructions to link you ENERJSMART
App account. Once complete you’ll be able to say “Okey
Google, turn my lamp on” or “Okay Google, set hallway to ON/
OFF”.
How to Pair the product to Google Home
Installation Diagram
Capacitor
Capacitor
Capacitor
Neutral Wire
Neutral Wire
Neutral Wire
Live and Wire
Live and Wire
Live and Wire
If you’re new to Echo, it’s a super smart speaker from Amazon
that responds to your voice.
Once you’ve bought Amazon Echo and downloaded the
ENERJSMART App, you’ll need to enable...
1. Enable the ENERJSMART App
In your Alexa app, tap Skills in the menu and search for
ENERJSMART. Tap Enable.
2. Link Account
Enter your ENERJSMART App username and password and
follow the onscreen instruction.
3. Talk to Alexa
Now the fun part Ask Alexa to control your ENERJSMART
device. Check a full list of things you can control by clicking
here.
How to Pair the product to Alexa
